Lubrication

From Nordan Symposia
Jump to navigationJump to search

Lighterstill.jpg

NG-Campaign-banner-Lubrication200.jpg

Origin

Latin lubricatus, past participle of lubricare, from lubricus slippery

Definition

  • 1: to make smooth or slippery

Description

Lubrication is the process, or technique employed to reduce wear of one or both surfaces in close proximity, and moving relative to each other, by interposing a substance called lubricant between the surfaces to carry or to help carry the load (pressure generated) between the opposing surfaces. The interposed lubricant film can be a solid, (e.g. graphite, MoS2) a solid/liquid dispersion, a liquid, a liquid-liquid dispersion (a grease) or, exceptionally, a gas.

In the most common case the applied load is carried by pressure generated within the fluid due to the frictional viscous resistance to motion of the lubricating fluid between the surfaces.

Lubrication can also describe the phenomenon such reduction of wear occurs without human intervention (hydroplaning on a road).

In the science of friction, lubrication and wear is called tribology.

Adequate lubrication allows smooth continuous operation of equipment, with only mild wear, and without excessive stresses or seizures at bearings. When lubrication breaks down, metal or other components can rub destructively over each other, causing destructive damage, heat, and failure.[1]